|
Sensor Integration Light Sensing LTE CAT.1 Microwave Linkage Dimming Output Mode Is 0-10V
| Place of Origin | China |
| Brand Name | LongJoin |
| Model Number | JL-712G3L |
LTE CAT.1 ZHAGA Controller
,0-10V Dimming ZHAGA Controller
,JL-712G3L ZHAGA Controller
JL-712G3L light-sensing,LTE CAT.1,Microwave linkage,dimming output mode is 0-10V
Product Summary
The JL-712G3L single lamp intelligent controller adopts the wireless communication mode of LTE CAT1, which has the ability of light sensing and microwave sensing, and supports local wireless linkage function. It can still be linked when the network is disconnected. The dimming output mode is 0-10V. You can use our UM9900 management system for remote monitoring and configuration. This product is only suitable for detecting pedestrians and low-speed vehicles<20km/h.
Product size
Product Features
-
ZHAGA standard interface
-
LTE Cat.1 communication
-
Synergia Modes Remote Configuration
-
Motion sensing upto 15m height
-
Synergying coverage upto 1km
-
Anti-mulfunction for outdoor purpose
-
Self-cycling prevented
-
LED Decay compensation built-in
-
Multi-sensing Strategy
-
Fault Dianosis & Report
-
MQTT Server Online Miguration Support
Specifications
|
Power Supply |
Rated voltage:12~24VDC,3W It is recommended that the transient current response capacity reach 1A |
|
Average power consumption |
1.2W |
|
Dimming Interface |
Type:0~10V Accuracy:±2% Drive Current:20mA(Typical) |
|
Communication |
LTE+Sub-G |
|
Spectral Acquisition Range |
Range: 0.01~64000Lux Accuracy: ± 2% Wavelength:350~1100nm,Peak wavelength: 550nm |
|
Turn on Illuminance |
100Lux(±10) |
|
Turn off Illuminance |
Reflected light + 40Lux(±10)after each turn on Lower limit:50+40Lux(±10)； Upper limit:6000Lux(±100) |
|
Reflected light compensation upper limit |
6000Lux(±100) |
|
Microwave parameters |
Frequency: 5.8 GHz Supported hanging height: ＜ 15m Sensing radius: 4-6 meters Sensing angle:<92 ° |
|
Linkage distance |
≤1km |
|
Default Tiny Brightness |
20% |
|
Default Tiny Light Maintenance Duration |
permanent |
|
Default trigger brightness |
100% |
|
Default trigger brightness maintenance duration |
30S |
|
Default Maximum Power Ratio |
80% |
|
Sensing radius |
4-8m (by 15m hanging height) |
|
Initialization Action |
After startup, the light is turned on at 100% brightness by default, and it is taken over by the device operation mode after 5S |
|
Lamp on delay |
10S |
|
Lamp off delay |
10S |
|
Duration of microwave induction light on |
Default 30S platform adjustable |
|
Microwave error prevention trigger |
Possess certain ability to prevent wind, rain, leaves, and small animals |
|
Trace brightness |
Default 20% platform adjustable |
|
Slightly bright duration |
Default permanent platform adjustable |
|
Network Protocol |
MQTT |
|
SIM card |
Cato plug-in type Supports 1.8V USIM cards NANO package |
|
Remote upgrade |
Sustain OTA |
|
Green LED Indicator Light |
Chang Liang: Successfully connected base stations |
|
Blue LED Indicator Light |
Blinking: Connecting to the server Always on: Successfully connected to the server |
|
Default periodic reporting frequency |
10 minute |
|
Energy saving strategy |
custom |
|
Electrostatic discharge immunity |
Contact discharge: ± 8kV, CLASSB Air discharge: ± 15kV, CLASS B |
|
Operating Temperature |
-40℃~70℃ |
|
Storage Temperature |
-40℃~85℃ |
|
Operating Humidity |
5%RH~96%RH |
|
IP Level |
IP66 |
|
Structural material |
foundation bed:PBT Shell:PC |
|
Standard |
IEC61000-4-2,GB/T2423.10-2008,UL94-V0 |
|
Certifications |
|
FAQs
A: It is an intelligent lighting controller integrating light sensing, LTE CAT.1 communication and microwave detection, supporting linkage dimming with 0-10V signal output for intelligent outdoor lighting control.
A: Light sensing judges ambient brightness, microwave detects moving people or vehicles, and the two work together to realize automatic on/off and dimming, achieving high efficiency and energy saving.
A: LTE CAT.1 provides stable cellular network communication, supporting remote control, real-time status feedback, fault reporting and cloud management of lighting equipment.
A: 0-10V is a universal and stable dimming signal, compatible with most LED drivers, realizing smooth stepless dimming and easy deployment in various lighting systems.
A: It integrates multiple functions in one unit, supports intelligent linkage and remote management, improves control accuracy, reduces wiring complexity and lowers overall operation cost.
Contact Us at Any Time
